Bullet wrist guards offer affordable, high impact protection for a variety of activities no matter what skill level. Made by and for skateboarders! Don't be afraid to put your hands on the ground.
Available in Small, Medium and Large.
Pads Size
Knee (cm/in)
Elbow (cm/in)
Wrist (cm/in)
Junior Set
20-27cm
7.9-10.6in
19-24cm
7.5-9.4in
13-16cm
5.1-6.3in
Adult Set
30-41cm
11.8-16.1in
25-30cm
9.8-11.8in
17-20cm
6.7-7.9in
Pads Size
Knee (cm/in)
Elbow (cm/in)
Wrist (cm/in)
S
27-33cm
10.6-13in
21-25cm
8.3-9.8in
16-19cm
6.3-7.5in
M
32-38cm
12.6-15in
23-27cm
9.1-10.6in
18-21cm
7.1-8.3in
L
37-43cm
14.6-16.9in
25-29cm
9.8-11.4in
20-23cm
7.9-9.1in
XL
42-45cm
16.5-17.7in
27-30cm
10.6-11.8in
How can I measure my knees, wrists & elbows to find the perfect skateboard pads size?
Tools Needed: A flexible measuring tape such as a tailor's tape or a piece of string you will then measure.
Method: Wrapping the tape or string around your knee, elbow or wrist. Mark where the tape meets the other end with your fingers and then check that point on the tape for the measurement. If you are using a string, do the same process and make sure that you do not let go of the measurement point before you can measure it with a ruler or tape measure.
New updated, modern design ABS plastic caps.
Tough, durable nylon corduroy outer material. Impact absorbing high density internal foam. Soft tension straps with Velcro closures for a custom fit.
New updated, modern design ABS plastic caps.
Tough, durable nylon corduroy outer material. Impact absorbing high density internal foam. Soft tension straps with Velcro closures for a custom fit.
Bildet er feil, disse finnene er Futures :-)
Material: Fiberglass
Size: Large |
Side Fins: Outside/Inside: Height: 4.65” Base: 4.36” Area: 15.47″|
Foil: Flat | Centre: Height: 3.85” Base: 3.82” Area: 11.07″|
Foil: 50/50 |
Warranty: All RYD fins are guaranteed for one year against factory and material defects and workmanship |
Care: Rinse fins with freshwater after your surf to flush away sand which may damage the fins or fin box.
Always remove your fins and place them in a fin wallet when travelling.
Material: Fiberglass
Size: Large |
Side Fins: Outside/Inside: Height: 4.65” Base: 4.36” Area: 15.47″|
Foil: Flat | Centre: Height: 3.85” Base: 3.82” Area: 11.07″|
Foil: 50/50 |
Warranty: All RYD fins are guaranteed for one year against factory and material defects and workmanship |
Care: Rinse fins with freshwater after your surf to flush away sand which may damage the fins or fin box.
Always remove your fins and place them in a fin wallet when travelling.
Road Movie Large Pivot
The True Range utilizes one of the more traditional construction
materials "” full fiberglass. The process involves laying up multiple
layers of fiberglass cloth and resin and then foiling the shape
of the fin to the desired template. Fiberglass fins are generally
stronger and are also the stiffest fin in our range. Fins with less
flex will react quickly and allow you to load up and push hard!
Only our Medium and Large fins will be available in True Range
as the construction will be too stiff for our x-small and small
templates.
Lightweight
Fiberglass Design
Quick Response
Rigid Flex
Outside/Inside
Height: 5.31 Inch
Base: 4.8 Inch
Area: 19.92 Inch
Foil: Flat
Centre
Height: 3.25 Inch
Base: 3.2 Inch
Area: 7.95 Inch
Foil: 50/50
Road Movie Large Pivot
The True Range utilizes one of the more traditional construction
materials "” full fiberglass. The process involves laying up multiple
layers of fiberglass cloth and resin and then foiling the shape
of the fin to the desired template. Fiberglass fins are generally
stronger and are also the stiffest fin in our range. Fins with less
flex will react quickly and allow you to load up and push hard!
Only our Medium and Large fins will be available in True Range
as the construction will be too stiff for our x-small and small
templates.
Lightweight
Fiberglass Design
Quick Response
Rigid Flex
Outside/Inside
Height: 5.31 Inch
Base: 4.8 Inch
Area: 19.92 Inch
Foil: Flat
Centre
Height: 3.25 Inch
Base: 3.2 Inch
Area: 7.95 Inch
Foil: 50/50
The DNA Helmet MATTE EPS is a lightweight, full-face helmet with a sleek design and superior protection.
It features a full coverage design for optimal protection and a low profile, ultra-lightweight EPS shell that is impact-tested for safety.
The helmet has built-in ventilation and adjustable fit system for a comfortable ride.
With its superior performance and style, the DNA Helmet MATTE EPS is the perfect choice for any rider looking for a high-quality helmet.